BLUETTI has released the Elite 100 V2, a portable power station with a 1,024 Wh LiFePO4 battery, 1,800 W of continuous AC output and a weight of about 25 lb.
Power, ports and charging
The unit distributes output across 11 ports. BLUETTI separately lists a 2,700 W 'Lifting Power' mode for selected resistive loads; that figure is not the station's continuous AC rating.
Maximum AC input is 1,200 W and maximum solar input is 1,000 W. BLUETTI states that AC charging reaches 80% in 45 minutes and that maximum solar input can produce a full charge in 70 minutes under its stated conditions.
Product details
- Battery
- 1,024 Wh LiFePO4
- Continuous output
- 1,800 W
- Ports
- 11
- Dimensions
- 320 x 215 x 250 mm / 12.6 x 8.5 x 9.8 in
- Weight
- About 11.5 kg / 25 lb
- UPS transfer
- At most 10 ms, according to BLUETTI
- Connectivity
- Wi-Fi and Bluetooth
- Variants
- Standard shell and bio-based shell
Cycle life, noise and price
BLUETTI rates the cells for more than 4,000 cycles to 80% original capacity. It lists 30 dB under light loads, while the user manual specifies 50 dB maximum. These are manufacturer figures rather than independent measurements.
The official US page listed both the standard and bio-based-shell versions at US$499 on September 5, 2026. It identifies the Elite 100 V2 as a 2026 product but does not state an exact first-sale date.
Sources & checks
This story contains no purchase links, affiliate links, or paid placement. Read our Editorial Policy and submit corrections through our Corrections page.
